The “boxy done right” Volvo Bertone Coupe of the late 1980s and early 1990s was never built in great numbers (fewer than 9,000 total, with 5,695 coming to the United States), but even so, what are the odds that you’d find a final-year project street-parked in Wilmington, Ohio? It doesn’t run and it has some cosmetic challenges inside, but for anyone willing to try their hand at interiors and fuel systems, this Coupe is for sale on Facebook Marketplace for $4,995.
As we all know, Volvo dabbled in Italianate coupes for decades before the 780 was introduced as a 1986 model . Forgive my bias when I say that my 1967 1800S was the best of the bunch, but it was also meant to be a little sportier than subsequent efforts.

Perhaps a little more polarizing was the Bertone 262C, a chopped-roof oddity built by Bertone in Italy, just like our featured Coupe. I rarely think about the 262C, but when I do, it’s with a morbid fascination. It’s so quirky, nowhere near conventionally attractive but so iconoclastic that you can’t look away. I can see why people would want one; the puzzled looks alone would be worth it.
That wasn’t the case with the 780 Bertone Coupe (our final-year 1991 feature car was simply a “Coupe,” no more a 780), because although it was clearly a Volvo, its proportions were just right and few could deny was it was a very handsome car.
One thing holding back earlier versions of the Coupe was the engine, the notorious PRV V6, but by 1991, the only engine available was Volvo’s “Redblock” four. In 1991, it displaced 2.3 liters and was fed through a turbocharger, which made the turbocharged Coupe significantly more powerful than it was with the old engine. It had 188 horsepower and 206 lb-ft of torque, which was unfortunately channeled through one transmission only, the four-speed automatic.
The seller says that the big four doesn’t run, and although he hasn’t done any diagnostic work, he suspects fuel system maladies. Non-running projects always involve a certain amount of risk, but the Volvo four’s reliability is almost legendary, and the car has only 97,000 miles on it. Still, anything can be broken.
The engine would worry me less than the interior. Since so few were built (only 389 1991 models were imported, although some leftovers may have made their way to the States later), trim parts might be hard to come by. The dashboard and its trim are commonly cracked, and indeed that is the case here.
Perhaps even more unnerving are the seats, whose leather upholstery is severely damaged both front and rear. With that being said, upholstery kits appear to be available online, but as with anything rare, there are few experiences with any of them that I can find online.
It’s also missing an original wheel and has a flat tire, so the car will have to be towed regardless of its condition as a runner; however, this view gives us a nice look at the Coupe’s great-looking profile. Apparently, every body panel was unique to the 780/Coupe, but it still maintains a Volvo family resemblance. Bertone did an amazing job on the styling.
So, is this rare project worth five grand or is it better to hold out for another? The look is right, the color is right for the car’s crisp lines, and the engine is arguably the one you want, but you’ll need to bring the elbow grease and a sewing machine.
Related Reading
Curbside Classic: 1980 Volvo Bertone Coupe: Lost In Translation (by Paul N)
1990 Volvo 780 Turbo Coupe – An Exotic Automobile For A Practical Consumer (by Brendan Saur)
Curbside Classic: 1987 Volvo 780 – Enough Said (by Tatra87)































Someone needs to make an offer on this. That body really deserves a conservation effort. VP Autoparts is geared up to make upholstry kits and Just Dashes offers repairs of cracked dashes. It’s a good bet that the engine is salvagable, especially with the relatively low mileage.
Well using Volvo’s proven 4 cylinder would tell me it would be reliable, pretty easy to work on, and get parts. However, all interior and body parts would be non-existent 35 years later. Your right about the kits costing $700 total for front and back and they look easy if you have ever done a swap. Not hard. I wouldn’t pay the 5K as at that price as I’d expect the car to be ready to drive with only minor wear and tear. All in all I prefer a manual. Now as to the missing wheel.
This needs saving, but I think the price is “optimistic”.
I’d offer 2.5k and see what happens. I love these and this looks as if it has good bones.
Re. “non runner” – I bought a VW t2b Westy off E-Bay as a non runner, got it home and put a battery on it to see if it would at least turn over. It did – so the next thing to do was make sure the fuel pump was connected…and with that done it burdst into life. a compression check confirmed a motor in rude health.
So with this Red Top it’s probably the pump or smething that is stoppinmg it running – I’d wager that a relatively minor repair will see it up and running.
How unique are those wheels? If really difficult to find I’m sure other Volvo or similar ET/bolt pitch wheels would work.
If it could be got running the trim problems could be lived with for a while. The body looks ok and the color suits it.
I really like this car!
This needs saving, but I think the price is “optimistic”.
I’d offer 2.5k and see what happens. I love these and this looks as if it has good bones.
Re. “non runner” – I bought a VW t2b Westy off E-Bay as a non runner, got it home and put a battery on it to see if it would at least turn over. It did – so the next thing to do was make sure the fuel pump was connected…and with that done it burdst into life. a compression check confirmed a motor in rude health.
So with this Red Top it’s probably the pump or smething that is stoppinmg it running – I’d wager that a relatively minor repair will see it up and running.
How unique are those wheels? If really difficult to find I’m sure other Volvo or similar ET/bolt pitch wheels would work.
If it could be got running the trim problems could be lived with for a while. The body looks ok and the color suits it.
I really like this car!