I’ve never owned a pickup, but I’ve often daydreamed of it if for no other reason but the occasional trip to the machine shop or shopping at the home improvement store. Of course, my truck would have to fall into my 1950-1975 sweet spot, but I’m afraid I’d be overwhelmed with choices. Chevy, Ford, Dodge, GMC, International, Jeep…all of them built purposefully handsome haulers, but there’s no way I could go wrong with this 1965 Ford F-100, which is for sale on Bring a Trailer in Zephyr Cove, Nevada.
The 1965 Ford was the first to use the long-running “Twin-I-Beam” front suspension, an improvement noteworthy enough for Ford to advertise it on the fenders of their two-wheel-drive models (four-by-fours didn’t get the upgrade until 1980). Because the system used “I-Beam radius rods,” the coil springs only had to control the ride, not locate the axles. Therefore, the ride was better than a leaf-sprung solid axle truck.
The 352-cubic-inch FE was also a newly available option in 1965. Although the 352 had been used since 1958 in Ford’s car lines, their light-duty trucks plodded along with the old 292 Y-Block through 1964, when it was finally given the heave-ho (in America, anyway). This one is backed by the Borg-Warner three-speed with overdrive, and combined with the 3.50:1 gears in the Ford nine-inch out back, this is a work truck that isn’t limited to peaceful two-lane highways.
One thing the new owner might want to consider is reinstalling a PCV system, as it is an emissions device that does not hinder performance. It looks like someone installed a breather in the passenger-side valve cover where the PCV valve was installed in 1965; CC’s own tbm3fan made a similar comment on BaT, and as the owner of one of these trucks, he’s in a position to know the nuts and bolts.
The “Custom Cab” interior option added some brightwork on the dashboard, which has dimmed a little with age and use. Ford still installed the ignition switch to the left of the steering column, something a little quirky that they were inclined to do in the early-to-mid 1960s. All-in-all, the interior looks used but not abused, which is perfect for a work truck.
The bench seat has definitely been reupholstered, most likely in the 1990s based on the fabric. For those who aren’t familiar with these Ford trucks, yes, that is the fuel tank mounted behind the seat.
There aren’t too many undercarriage pictures, but those that are posted support the claim that this truck “spent its entire life in Northern California.” You can see the Cherry Bomb muffler and nine-inch rear end in this shot.
While short-bed pickups tend to bring more money, the long bed is where it’s at, at least for me. (The more room, the better.) For a work truck, the bed of this ’65 is nearly mint, so I’d be inclined to do something to protect it. A drop in bedliner, perhaps? I’d hate to use a coating and cover up that Rangoon Red paint forever.
And that’s because it’s perfect as it sits. The problem with me is that I tend to want the last thing I see, kind of like the person who agrees with the last argument he hears. Therefore, as of this moment, my dream work truck is this 1965 Ford F-100. Who’s with me?
Related Reading
My 1965 Ford F-100 Custom Cab – Restoration, Part 1 (by tbm3fan)
My ’66 Ford F-100 Celebrates Its 60th Birthday – And It’s Not Ready To Retire Yet (by Paul N)































Ford vans continued using that left-handed ignition switch at least as late as 1976.
I would love to experience one of these early Twi I Beam trucks. My leaf-sprung 63 (with extra leaves) rode like it was on solid hard rubber tires.
I would also prefer a long bed. I had a recent flirtation with a 73 Dodge Club Cab with a long bed, but discovered that it would not fit in my garage. One of these almost certainly would.
I endorse this ad!
Very nice truck; I prefer the ’65 grille over the ’66. But I’ve got a thing for sixes, so make mine with the optional 300 six that was rated at no less than 170 gross hp and 150 net hp. That’s as much or more than a lot of V8s brought to the table within a few years. And I’ve never felt underpowered with my 240 six. These are surprisingly light (3,455 lbs), so it doesn’t take much to scoot them down the road.
I regret not building a carport for mine sooner. It sat outside its whole life until a couple of years ago, and the bed has a lot of rust holes now. I need to learn how to weld.
Honestly, 110-volt MIG welders are inexpensive enough that you could pick one up for some quick sheetmetal repair and practice on some scrap steel. You can get metal from the local home-improvement stores fairly inexpensively, too. Do your best and grind the rest! 🙂
I am very seriously considering, or more planning to do this. I just need to get that Farmall Cub transmission and the rest of it back together before I do anything else. I need to take this plunge.
I too prefer a long bed pickup truck. Perhaps because thats what I grew up with and first learned to drive. 8 ft bed, V8 and a 4 speed for me!
I had a ’68 F250 Camper Special with the 360 FE, 4sp “granny low”. I loved that engine, great low end grunt, body …..not so much but still solid!
I saw this a few days ago on my Ford Truck forum where we tend to dissect what is being sold. It was noted that a replaced fender meaning a hit. The bumper is not a 65-66 bumper but 67 and up. The grille looks to be painted argent since replacements back then would have been the 66 grille. Of course all saw the tiny breather replacing the pcv valve and the fact that the oil breather hose is just hanging. The distributor has been replaced either in whole or just the advance can. Not to mention there is no vacuum line to it. Lots of pictures but none around the front radiator support. All that was up there before I ever saw the ad which doesn’t surprise me as there are some true 61-66 F series experts there.
Ahh, the Twin I Beams, the cheapest way to get an independent front suspension. It was simple and reliable, so reliable in fact that large fleet customer still specify it for the 2WD Ford F-250 pick up.
These are handsome beasts. I had a ’66 F250 Camper Special Custom cab. I found the missing white door panels and zippered door packets at the local Pick and Pull. I had the truck repainted and got lots of compliments. It seems that everyone loves a clean old pick up. Mine had a very tired 352 V8 with automatic and power brakes. No power steering meant a lot of exercise during parking maneuvers. I found the ergonomics of the cab to be superior to my Dad’s ’75 Chevy Stepside, and I loved having the 8 ft. bed. This was my first truck. I considered rebuilding or replacing the engine but the reality was that I was going to be driving down to LA a lot for my swap meet business, and I knew that an old truck would be tiring to drive 700 miles or more on a weekend. This truck made me a Ford fan and led me to my purchase of a new ’07 F150, long bed of course, that I still have and love.